Grid Tie Inverter Solar Power Easy Solar Solution Power Inverters

September 23, 2009 by admin  
Filed under Videos


http://www.greenpowerscienc…
This is a grid tie inverter that is 200 watts. It actually reads a bit higher for various reasons. This was to see how well it worked. POWER INVERTERS.

Comments

10 Responses to “Grid Tie Inverter Solar Power Easy Solar Solution Power Inverters”
  1. 1kzrider says:

    dan, I am glad I come across this it is a solution I was? looking for. Can you do a H.F. dual 45 watt kit on solar tracking setup? Using the newer 300-330 watt model of this inverter from buyerisland . net

  2. jwpmkp04 says:

    this is bs, if? the main is off the power can’t go back threw the meter…..scammer

  3. GREENPOWERSCIENCE says:

    WATCH the video before you? comment, THE MAIN IS TURNED BACK ON:-)

  4. MrDerekReilley says:

    I am interested in buying this? inverter. Where do I buy it and what is the name of it?Thanks!

  5. chicagoelectricbicyc says:

    What if I? used two 200 watt inverters in different outlets in my garage? would that work?

  6. chicagoelectricbicyc says:

    dan, if you? wanted to stack the inverters could you plug them into a surge protector then plug it into the wall? would that work?

  7. GREENPOWERSCIENCE says:

    They usually recommend one per circuit breaker. This is a newer technology that is getting more popular so that may change. I would recommend against that for now. It may work but not sure. For safety reasons I would say no.There? is a turbine company I have seen stack them to one outlet. Will try to find the link again.

  8. davidlu866 says:

    One question: if the inverter is feeding power back to the neighborhood grid, am I getting refunded (lower bill) because? I am feeding power back to the source???Nice video BTW, very very helpful!

  9. carliviris says:

    for that meter to go back one digit you need 5 hours of 200watts? into the system, so go figure why it didn’t move. your house might be consuming 2kw/h so in 30 minutes it will move 1 digit but pumping 200w it takes 5 hours to move the same digit. you need to test 1 or 2 or maybe 3kw of power to see it move faster.

  10. mephil8800 says:

    can i just point out nobody should ever connect a power lead to a battery the way you did. your batteries look sealed. but for others, they produce gas which is flamable? and if that spark lights the gas your battery will explode and you may end up with half a face from the battery acid..

Speak Your Mind

Tell us what you're thinking...
and oh, if you want a pic to show with your comment, go get a gravatar!